Wind farm noise – revised acoustics Standard published
1 March 2010
Standards New Zealand has published Acoustics – Wind farm noise NZS 6808:2010. The revised and improved Standard recommends limits on wind farm noise.
NZS 6808:2010 provides tools to assess, measure, and limit noise from wind turbines. The revised Standard is expected to form the basis of noise-related conditions for all newly consented wind farms in New Zealand.
Local authorities (district and city councils), wind farm developers, and acoustics consultants who monitor compliance with resource consent conditions will use NZS 6808:2010.
New Zealand Wind Energy Association (NZWEA) and the Energy Efficiency and Conservation Authority (EECA) jointly sponsored the revision.
Wide industry representation and public comment
NZS 6808:2010 was developed through a well-established, robust Standards development process. The development committee included experts in acoustics, planning, resource management, environmental health, wind farm developers, and individuals who represented local authority and community interests.
The draft of NZS 6808:2010 (DZ 6808) was released for public comment from February to April 2009 and over 600 comments were received. The committee reviewed each comment and changes were made to the draft before the committee reached consensus on the final published version of the Standard.
Reflecting 10 years of wind farm development
The revised Standard reflects 10 years of wind farm development in New Zealand since the release of the original Standard in 1998. NZS 6808:2010 revises and replaces the 1998 version.
- explicitly addresses issues such as the cumulative effects from multiple wind farms or wind farms developed in stages, forewarning prospective residents of an area already affected or permitted to be affected by wind farm sound (reverse sensitivity), and wind farm specific audible characteristics (amplitude modulation)
- includes model consent conditions designed to ensure correct implementation of the Standard. When included in a consent or designation these conditions will provide local authorities with practical measures for monitoring and enforcing compliance
- retains the recommended noise limits from the 1998 version to provide protection against sleep disturbance and noise at locations surrounding a wind farm
- includes a new, more stringent noise limit that can be used if justified by special local circumstances
- aligns with NZS 6801:2008 Acoustics – Measurement of environmental sound and NZS 6802:2008 Acoustics – Environmental noise. This includes adopting the 'L90' parameter in place of 'L95' as a measure of noise levels. 'L90' is a measurement of the noise level exceeded for 90 percent of the time
- replaces the simple prediction method by methods using octave-band calculations and accounting for a wider range of factors influencing sound propagation.
NZS 6808:2010 is consistent with the requirements of the Resource Management Act 1991. The recommended noise limits are consistent with World Health Organization guidelines, limits from other sources of noise, and international practice.
Applying the noise limits to wind farms
NZS 6808:2010 balances sustainable management of natural wind resources with the protection of the community. Applying the noise limits recommended in NZS 6808:2010 to wind farm developments will avoid significant adverse noise effects from the wind farm, although the wind farm may be audible at times.
The tools in NZS 6808:2010 may be applied:
- during the planning and development of a wind farm
- to confirm compliance with noise restrictions in resource consent conditions and district plan rules
- to investigate and assess noise complaints from operating wind farms.
Where to get more information
Buy NZS 6808:2010 Acoustics – Wind farm noise
The Resource Management Law Association and the New Zealand Wind Energy Association are running seminars for users of the Standard in several locations throughout New Zealand. The seminars will provide a brief overview of wind energy in New Zealand, the key recommendations in NZS6808:2010, and how the Standard is to be applied.
Visit the New Zealand Wind Energy Association website for more information or to register your interest in the seminars. (www.windenergy.org.nz/events/noise-standard-seminars)
View the NZS 6808:2010 factsheet [ 61 kB PDF]. (www.windenergy.org.nz/documents/factsheets/nzs6808.pdf)
→ NZS 6801:2008 Acoustics – Measurement of environmental sound
→ NZS 6802:2008 Acoustics – Environmental noise
→ NZS 6803:1999 Acoustics – Construction noise
→ NZS 6805:1992 Airport noise management and land use planning
→ NZS 6806 Acoustics – Road traffic noise – New and altered roads (in development)
→ NZS 6807:1994 Noise management and land use planning for helicopter landing areas
→ NZS 6809:1999 Acoustics – Port noise management and land use planning
Order or download these Standards from www.standards.co.nz, email firstname.lastname@example.org, or call 0800 782 632.
Stay in touch
Subscribe to Standards New Zealand's monthly e-magazine Touchstone for the very latest news on Standards relevant to you and your industry. To subscribe, visit www.standards.co.nz/touchstone, scroll to the end of a page, and click 'subscribe'.
Wind turbine photos are available on request from Standards New Zealand or the New Zealand Wind Energy Association.
Standards New Zealand media contact
Shona Weller, (04) 498 3986, email@example.com
New Zealand Wind Energy Association media contact
Fraser Clark, (04) 499 5048, mobile 027 244 1049
Energy Efficiency and Conservation Authority media contact
Jane O'Loughlin, (04) 470 2421, Jane.OLoughlin@eeca.govt.nz
About Standards New Zealand
Standards New Zealand is the operating arm of the Standards Council, and part of New Zealand's standards and conformance infrastructure. Standards New Zealand is an autonomous Crown entity responsible for managing the development and distribution of Standards across a range of sectors nationally.
Standards New Zealand is a self-funded, not-for-profit organisation, relying on revenue primarily from contracts with sponsors to develop Standards, and from sales of Standards publications. Our independence helps us facilitate a cross section of stakeholders' contributions to the development of Standards, and ensure that each Standard meets the needs of end users.