NZS 3404.1:2009 LOOSELEAF & BINDER
Steel structures Standard - Materials, fabrication, and construction
$197.00 NZD (ex GST)Retail
$157.60 NZD(ex GST)Members
This Standard is not available to view online.
You can order PDFs of ISO, IEC, BSI, AS, and ASTM Standards by calling 0800 782 632 during business hours or emailing enquiries@standards.co.nz
This document forms a Part of NZS 3404:
NZS 3404.1 sets out minimum requirements for the selection of materials, corrosion protection systems, and the fabrication, erection and construction of steel structures. It will supersede the relevant provisions in NZS 3404:1997 and will be referenced by NZS 3404.2 to NZS 3404.7 once those parts are complete. This Standard applies to building structures; crane support girders; highway, railway and pedestrian bridges; and composite steel and concrete beams and columns. This Standard is supplied with loose pages in a ring binder.
[hide]Publishing Information:
Status: CURRENT
Published: 13/10/2009
Pages: 161
ICS Codes:
91.080.10 Metal structuresReferences:
[show]Standards NZ References:
- 1170.0:2002(AS/NZS)
- 1170.1:2002(AS/NZS)
- 1170.2:2002(AS/NZS)
- 1170.3:2003(AS/NZS)
- 1170.5:2004(NZS)
- 1252:1996(AS/NZS)
- 1365:1996(AS/NZS)
- 1554.1:2004(AS/NZS)
- 1554.2:2003(AS/NZS)
- 1554.5:2004(AS/NZS)
- 1559:1997(AS/NZS)
- 1594:2002(AS/NZS)
- 1873.1:2003(AS/NZS)
- 1873.2:2003(AS/NZS)
- 1873.3:2003(AS/NZS)
- 1873.4:2003(AS/NZS)
- 2312:2002(AS/NZS)
- 3101.1&2:2006(NZS)
- 3104:2003(NZS)
- 3109:1997(NZS)
- 3404.1&2:1997(NZS)
- 3678:1996(AS/NZS)
- 3679.1:1996(AS/NZS)
- 3679.2:1996(AS/NZS)
- 3750.15:1998(AS/NZS)
- 3750.9:2009(AS/NZS)
- 3834.2:2008(AS/NZS ISO)
- 3834.3:2008(AS/NZS ISO)
- 3834.4:2008(AS/NZS ISO)
- 4680:2006(AS/NZS)
- 9000:2006(AS/NZS ISO)
- 9001:2008(AS/NZS ISO)
- 9004:2000(AS/NZS ISO)
[show]Non Standards NZ References:
- ANSI/AISC 341:2005 Seismic provisions for structural steel buildings
- AS 1110.1-2000 ISO metric hexagon bolts and screws - Product grades A and B - Bolts
- AS 1110.2-2000 ISO metric hexagon bolts and screws - Product grades A and B - Screws
- AS 1111.1-2000 ISO metric hexagon bolts and screws Product grade C - Bolts
- AS 1111.2-2000 ISO metric hexagon bolts and screws Product grade C - Screws
- AS 1112.1-2000 ISO metric hexagon nuts - Style 1 Product grades A and B
- AS 1163-1991 Structural steel hollow sections
- AS 1210-1997 Pressure vessels
- AS 1275-1985 Metric screw threads for fasteners
- AS 1391-2007 Metallic materials Tensile testing at ambient temperature
- AS 1418.1-2002 Cranes, hoists and winches - General requirements
- AS 1576.1-1995 Scaffolding - General requirements
- AS 1627.1-2003 Metal finishing - Preparation and pretreatment of surfaces - Removal of oil, grease and related contamination
- AS 1627.2-2002 Metal finishing - Preparation and pretreatment of surfaces - Power tool cleaning
- AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning
- AS 1627.7-1998 Metal finishing - Preparation and pretreatment of surfaces - Hand tool cleaning of metal surfaces
- AS 2074:2003 Cast steels
- AS 2159:1995 Piling - Design and installation
- AS 2382:1981 Surface roughness comparison specimens
- AS 2673:1983 Paints for steel structures - Alkyd/micaceous iron oxide
- AS 3828:1998 Guidelines for the erection of building steelwork
- AS 3894.3-2002 Site testing of protective coatings - Determination of dry film thickness
- AS 4100:1998 Steel structures
- AS 5100.6-2004 Bridge design - Steel and composite construction
- ASTM A106/A106M:2008 Standard specification for seamless carbon steel pipe for high temperature service
- ASTM A193/A193M:2009 Standard specification for alloy-steel and stainless steel bolting materials for high temperature or high pressure service and other special purpose applications
- ASTM A514/A514M:2005 Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding
- BS 4.1:2005 Structural steel sections. Specification for hot-rolled sections
- BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
- BS 8004:1986 Code of practice for foundations
- EN 10025.1:2004 Hot rolled products of structural steels - Part 1 General technical delivery conditions
- EN 10025.2:2004 Hot rolled products of structural steels - Part 2 Technical delivery conditions for non-alloy structural steels
- EN 10025.3:2004 Hot rolled products of structural steels - Part 3 Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025.4:2004 Hot rolled products of structural steels - Part 4 Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025.5:2004 Hot rolled products of structural steels - Part 5 Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025.6:2004 Hot rolled products of structural steels - Part 6 Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- EN 10029:1991 Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass
- EN 10210.1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1 Technical delivery conditions
- EN 10219.2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2 Tolerances, dimensions and sectional properties
- EN 1090-2:2008 Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures
- EN 12812:2008 Falsework - Performance requirements and general design
- EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
- EN 1993-1-1:2005 Eurocode 3 - Design of steel structures Part 1-1: General rules and rules for buildings
- EN 1993-5:2007 Eurocode 3 - Design of steel structures Part 5: Piling
- ISO 2566.1:1984 Steel - Conversion of elongation values - Carbon and low alloy steels
- ISO 9224:1992 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
- JIS G 3101:2004 Rolled steel for general structure
- JIS G 3106:2008 Rolled steels for welded structure
- JIS G 3114:2008 Hot-rolled atmospheric corrosion resisting steels for welded structure
- JIS G 3132:2005 Hot-rolled carbon steel strip for pipes and tubes
- JIS G 3136:2005 Rolled steel for building structure
- JIS G 3192:2008 Dimensions, mass and permissible variations of hot rolled steel sections
- JIS G 3193:2005 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strip
[show]NZ Act/Regulation References:
- BUILDING ACT 2004
- CHARTERED PROFESSIONAL ENGINEERS OF NEW ZEALAND ACT 2002
[show]Non NZ Act/Regulation References:
[show]Other References:
- American Institute of Steel Construction, Quality criteria and inspection Standards.
- American Petroleum Institute. API 5L Specification for line pipe. 42nd ed. Washington: API, 2000.
- AREMA. AREMA Manual for railway engineering. Chapter 15. Lanham, MD: American Railway Engineering and Maintenance-of-Way Association, 2009.
- AWS D1.5:2008 Bridge welding code
- IIW, 2007. XIII-2151-07 Recommendations for fatigue design of welded joints and components. International Institute of Welding.
- IPENZ/ACENZ. The briefing and engagement of consultants. IPENZ/ACENZ, 1994.
- NZTA. Bridge manual SP/M/022. 2nd ed. New Zealand Transport Agency, 2003.